RFID prelam sheet provides card manufacturers with a durable and convenient solution for the manufacture of finished cards. prelam stands for pre-laminated. This means fusing together single layers under pressure and high temperature in special lamination press machinery after the electronic parts have been embedded into the carrier material and assembled.

Operating Frequency
125 kHz
13.56 MHz

Layout:2*5,3*8,5.5 or others

             Layout:2*5,3*8,or 5*5 or others

RFID Inlays for RFID Labels

RFID inlays are composed of an IC and an antenna

Wet inlays are inlays that have an adhesive backing with a clear PET , PET wet inlays are commonly used to make "RFID Labels"  where the inlay is placed on the back of the label with the adhesive side away from the label side so that the label has continuous adhesive. 

Dry inlays are inlays that are attached to the substrate backing material commonly called the web. 

Operating Frequency
13.56 MHz 

860-960Mhz

Same as RFID sticker package.

Pack in roll,10000-20000pcs per carton